Hi! You’re now check about rocker switches solution exactly where you are going to obtain the critiques, videos, links and images that will certainly spark your interest. This internet site provide info that you simply will need. There is a whole array of resources that happen to be waiting to be found. You may also carry on reading and search additional reviews or solutions as under. We have fascinating sources that have been gathered by our experts in rocker switches .hope you will get the very best reviews and invest in the correct product about rocker switches .
Reviews: customer reviews...
List Price: unavailable
Sale Price: Too low to display.
No description available.
No features available.
There was an error connecting to the Amazon web service, or no results were found for your query.
If you’d prefer to know extra about %keywords%, you could click on the sources to lead you to a whole lot a lot more facts and facts. You might also make use of the search box to further lead you to other articles. If you want to contribute to this web site,we would adore to hear your suggestions! It would be terrific to possess you share your thoughts about %keywords%. Definitely really feel definitely totally free to send an e-mail to us.
eggersaustin asked How to mod Computer lights to turn on and off with a rocker switch?
I have a rocker switch that has three prongs (+,-,ground). And then I have a 5 Lazar led that has a molex end to it(with 4 cables 1 yellow, 2 black, and 1 red). And I was wondering if anyone knew how to set this up to where if I flip the switch the light would come on.
And got the following answer:
The 'Molex' power supply connector has 1 Yellow,(12volt), 1 Red,( 5volt), and two Black,( Both are ground wires) Your power supply converts AC electricity, to DC electricity. DC ALWAYS has a Positive,(+), and a Negative,(-) connection. Problem is, I don't know if the Lazar LED setup uses 5 volts, or 12 volts. The Molex connector has four wires, granted. Plus, one is 12 volts, (Yellow), and one is 5 volts,(Red), but just because a four pin Molex connector is used, doesn't mean the Lazar LED setup is using both voltages. It might be one, or the other, with one of them not making a connection to the Lazar setup. Follow me? At any rate, it's time to find out. Do you have a cheap multimeter with OHM's setting? This way you can check the continuity. This method may be considered safe, than simply connecting wires together, and hoping for the best. Set the multimeter to 1K. Touch the leads together to make sure the meter is working. If the 9 volt battery died for the multimeter, you'll be getting nowhere! lol! Touch the Red (Positive) lead to the Yellow wire, of the Molex connector on the Lazar setup. Now touch the Black (Negative) lead of the multimeter to one of the Black wires, in the Molex connector. (On the Lazar setup) Nothing? The needle of the multimeter doesn't move? Then take the Black lead, and touch the other Black wire. Still nothing? Okay, touch the Yellow wire with the Red lead from the multimeter. 0? Take the Black lead and touch the other Black wire. The needle of the OHM meter on the multimeter, should move with one of the combinations. These are the two wires that you'll deal with. If the OHM needle moves, when touching either one of the two Black wires of the Lazar Molex connector, just take your pick of these wires. You need a female socket Molex connector with all four wires coming out. Length of the wires is up to you. See what length of wires you need, to easily connect this Molex connector to your power supply, and to the rocker switch. Remember! The Yellow wire in this Molex connector is a Positive wire. It is a 12 volt Positive wire. This connects to the + on the rocker switch. Or it may be the Red, 5 volt Positive wire you need. The test above tells you which one. The test above also tells you which Black ground wire is the one you want. It connects to the - wire on the rocker switch. The ground connection on the rocker switch, connects to anywhere you want, on the metal frame of the computer case. Edit: I know the above stuff is hard to follow. It's much easier,( I feel), when you have the Molex connector, the multimeter, and the rocker switch in front of you. You are making a circuit. A very simple one. Another simple circuit is connecting a flashlight battery to a flashlight bulb. One wire end connects to the outside shell of the light , and the other end connects to the negative side of the battery. One wire end connects to the middle 'pin' of the light, and to the positive side of the flashlight battery. There's the circuit, or 'circle'. Now cut the positive wire in two pieces. (The wire that goes to the positive side of the battery.) Put the rocker switch in the middle. Doesn't matter which wire, of the two wires, connect to the + on the rocker switch, or the - of the rocker switch.